Vax C85-P5-Pe Power 5 Pet Bagless Cylinder Vacuum Cleaner

• The dirt container may not be correctly fitted, remove the dirt container from the vacuum cleaner and check its assembled correctly, refit ensuring its locked into place. 
• The shroud is blocked. 
• The separator is incorrectly fitted. 
• The filter may be clogged, clean the filter. 
• The dirt container may be blocked, empty the dirt container. 
• There may be a blockage in the hose/tube. Disconnect from the vacuum cleaner and carefully remove any blockages.

To maintain the effciciency of your vacuum cleaner, we recommend that you clean the filter as often as possible but ideally at least once a month.

Check the contents on the back of the box to make sure the part is included with your vacuum cleaner.

The filters may be clogged, clean the filter.

The dirt container may not be correctly fitted, remove the dirt container from the vacuum cleaner and check its assembled correctly, refit ensuring its locked into place. The shroud is blocked. The separator is incorrectly fitted. The filter may be clogged, clean the filter. The dirt container may be blocked, empty the dirt container. There may be a blockage in the hose/tube. Disconnect from the vacuum cleaner and carefully remove any blockages.

If your vacuum is experiencing a loss of suction, please try the following:

• Check for any debris or blockages in the tubing and main body.
• Ensure the filter has been cleaned and left to dry as per the maintenance and care instructions.
• Check to see if the issue is happening on all attachments. If it is happening with a particular attachment then check there is no damage to this attachment and it is fitted correctly.

If you are still experiencing issues, please get in touch with the support team using the contact details on this page.

If the vacuum is not turning on, please try the following:

• Try an alternative plug socket.
• Change the fuse in the plug.

If there is light and sound but the unit isn’t turning on fully, please ensure the vacuum has been cleaned correctly; check for blockages and clean the filter.

If you are still experiencing issues, please get in touch with the support team using the contact details on this page.

If the vacuum is hard to push, please check try the following:

• Check for any blockages or debris in the floorhead.
• Change the pile adjustment setting for the floorhead if available on the model (please refer to the user manual for the location).
• Check if the issue occurs on different floor types, as thick carpets will be harder to push on.

If you are still experiencing issues, please get in touch with the support team using the contact details on this page.

Check that the dust container is fully clipped into place. Follow any symbols on the dust container and twist/clip on securely.

It is normal for the vacuum to make noise during operation. If the vacuum is making unusual or excessive noises, check the following:

• Check the filter is secure in the dust container as it may be rattling.
• Clean the filter thoroughly to remove any dirt and debris.
• Securely fasten the dust container to prevent parts from moving.
• Check the floor head for any dirt or damage which may be causing the sound.

If the brush roll isn't spinning, check the following:

1. Turn off and unplug the vacuum.
2. Remove any hair or debris that is tangled around the brush roll.
3. Check that the belt on the brush roll is securely attached.

Please note, this only applies to models that have a spinning brush roll.