Gtech AR02 AirRam Filter Bagless Upright Vacuum Cleaner

To maintain the effciciency of your vacuum cleaner, we recommend that you clean the filter as often as possible but ideally at least once a month.

To remove the handle, use a pen (or charger jack) to push the clip located on the back of the AirRam whilst lifting the handle at the same time.

We have designed the AirRam to take away all the things you hate about vacuuming when you are cleaning the floor. AirRams radical design does away with the heavy, bulky components of a traditional upright vacuum, giving you an improved user experience without compromising on performance. We have separately designed the Multi, with the same vision, to give you the cleaning attachments you are used to from your old vacuum, but without the cord. If you would like to find out more please visit http://www.gtech.co.uk/cordless-vacuum-cleaners/multi-cordless-hand-held-vacuum.html

If your AirRam isnt fully charged, it wont run for a long as it should. To ensure the AirRam is fully charged, run it down almost completely, then re-charge it for 4 hours. Check your user manual for charging instructions. Run-time could also be reduced if the brush bar becomes clogged with built-up hair and dirt, because the motor has to work harder requiring more power from the battery. Ensure the brush bar is rotating freely by giving it a clean. Once fully charged, the AirRam should display 4 green LEDs at the front while running. Each LED represents approximately 10 minutes of cleaning time (though the exact time will vary depending on the floor surface youre vacuuming). The LEDs will go out as you clean, giving you an indication of the remaining cleaning time. If, after re-charging, your AirRam stops unexpectedly after reaching 2 green LEDs, its likely that the battery has developed a fault. You can order a replacement battery from the GTECH website