Bush F54180FFWTDB Fridge Freezer - Black

If there is ice build-up in the fridge section, try the following:

• Ensure there is the correct clearance around the appliance. This will be stated in your user manual.
• Ensure it is located in an area of a similar temperature between 10-32 degrees.
• Check that the door is closing properly and there is no debris in the seals.
• Avoid over-filling the appliance and ensure nothing is touching the back.
• Check that the fridge is on a setting between 3 and 4.
• Keep the appliance away from any heat sources.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If the freezer section is freezing too much, try the following:

• Ensure there is the correct clearance around the appliance. This will be stated in your user manual.
• Keep the appliance away from any heat sources.
• Check that the door is closing properly and there is no debris in the seals.
• Avoid over-filling the appliance and ensure nothing is touching the back.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If both areas are not cooling, try the following:

• Ensure there is the correct clearance around the appliance. This will be stated in your user manual.
• Ensure it is located in an area of a similar temperature between 10-32 degrees.
• Check that the door is closing properly and there is no debris in the seals.
• Avoid over-filling the appliance and ensure nothing is touching the back.
• Check that the fridge is on a setting between 3 and 4.
• Keep the appliance away from any heat sources.
• Check the power is coming on correctly and, if necessary, try an alternative mains socket and fuse.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If there is a smell coming from the appliance, try the following:

• Check the door seals and ensure they are clean.
• Empty and wipe out the drip tray at the back of the appliance above the compressor tank.
• Turn the appliance off, clean the inside with warm water and white vinegar. If necessary, leave a lemon inside the appliance for a few hours to help remove any smells.
• Check food has not leaked anywhere and keep on top of food maintenance.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If the drainage hole is blocked, try the following:

• Use the brush included with the appliance to clean the drain hole.
• Pour water down the hole and check the drip tray to ensure the water is dripping through.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If the appliance isn’t level, try the following:

• Ensure the adjustable feet are set and tight. They can be screwed and unscrewed. You can find more instructions on this in the user manual.
• Ensure the flooring is level.
• The front of the appliance will be elevated slightly more than the back, allowing any water to run down the drain hole.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If the water dispenser is leaking, try the following:

• Remove the water dispenser.
• Check the seals that the water dispenser is going into for any gaps or debris.
• Put the dispenser back in.
• Check that the lever itself is not loose or stuck.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If water is not being released from the water dispenser, try the following:

• Remove the water dispenser.
• Check the seals that the water dispenser is going into for any gaps or debris.
• Put the dispenser back in.
• Check that the lever itself is not loose or stuck.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

If the light is not working, please refer to your user manual for instructions on changing the bulb. If the issue is still not resolved or your manual does not state the bulb can be removed, please get in touch with the support team using the contact details on this page.

If the compressor is not making a touch, try the following:

• Ensure there is power going to the appliance.
• Check there is enough clearance around the appliance.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.

The compressor sound should be a humming noise from the compressor every now and then. This is when the appliance needs to get to the correct temperature and is expected. If you still believe it is too loud, check the following:

• Ensure there is clearance around the appliance.
• Check both sections are cooling correctly.

If the issue is still not resolved, please get in touch with the support team using the contact details on this page.