Ninja ES701UK Luxe Cafe Pro Espresso Coffee Machine

Several factors could affect the volume of water dispensing from the portafilter: 

• Not enough water in the reservoir: Ensure the water reservoir is adequately filled. When using the luxe basket, 533ml of water is required. When using the double or single basket, fill to the min. line. 

• The water reservoir is not seated firmly: Check that the water reservoir is firmly seated in its place on the back of the machine. 

• The machine is warming up/reaching the operating temperature: Please allow a short time for the machine to warm up before it dispenses. 

• The grind size is too fine: Let the brew time out and follow the recommended grind setting on your next brew.  

• The grind size is too fine: Let the brew time out and follow the recommended grind setting on your next brew. 

• Basket cleanliness: Before grinding, ensure the basket is free of any clogs or debris that could impede the flow

• The grind size is too coarse: Let the brew time out and follow the recommended grind setting on your next brew. 

• Coffee is tamped too lightly: With the portafilter in the grinding cradle, press the integrated tamper lever down firmly until it stops. It's recommended to tamp twice for a more even puck

• Machine has not reached operating temperature: Please allow a short time for the machine to warm up before frothing begins. 

• Not enough water in the reservoir: Ensure the water reservoir is filled up to the min. line. 

• The water reservoir is not seated firmly: Check that the water reservoir is firmly seated in its place on the back of the machine. 

• Wand is not inserted down: Ensure the steam wand is inserted into the milk jug, with the milk jug properly seated on the platform. 

• Not enough milk in the milk jug: Ensure milk is filled up to the min. line.

• Preheat the portafilter: Rinse the portafilter under hot water before grinding. Please make sure that the basket is completely dry before grinding. 

• Preheat the cup: Rinse the cup under hot water before brewing to increase the temperature of the brew. 

• Adjust water temperature: Increase the temperature of the brew by using the TEMP/STRENGTH button on the control panel. 

• Use heated froth settings: All froth settings are heated except cold foam, which is denoted with a snowflake

• Ensure the machine is plugged into a working socket. 

• After plugging the machine in, press the POWER button. 

• To save power, the machine will automatically shut off after 20 minutes

• Not enough water in the reservoir: Ensure the water reservoir is filled up to the min. line. 

• The water reservoir is not seated firmly: Check that the water reservoir is firmly seated in its place on the back of the machine. 

• If the reservoir has water filled over the min. line and is seated firmly, some water pump noise is considered normal. 

• You may also hear this noise while frothing. This is normal.