JLab GO Air Pop In-Ear True Wireless Earbuds - Slate

1. Keep the earbuds in the charging case and forget “JLab GO Air Pop” from your Bluetooth device settings. 
2. Quick tap 7x on one earbud in the charging case. The earbud blinks blue 4 times 
3. Quick tap 7x on the other earbud in the charging case. The earbud blinks blue 4 times. 
4. Take both earbuds out of the charging case. One earbud will be solid white and the other will blink blue/white indicating ready to pair to your device. 

• “Hello”: Power ON
• “Ready to Pair”: GO Air Pop is
• ready to pair to Bluetooth device
• “Bluetooth Connected”:
• Earbud is connected to device
• “Battery Full”: 100-75%
• “Battery Medium”: 75-25%
• “Low Battery”: Less than 25% (When power decreases to 10%,“Low Battery” will play one time)
• “Goodbye”: Power OFF

1. Place the Earbuds in the case. 

2. The Earbuds will charge inside the case.

1. Connect the GO Air POP into a computer or a USB 5V 1A (or less) output device (for example, a USB plug socket).

2. Keep plugged in until the light shows a Solid Blue to show it is fully charged.

Left Earbud

VOLUME DOWN: Single tap
SIRI (iOS) or “OK GOOGLE”
(ANDROID): Double tap
TRACK BACK: Press & hold 1+ sec

Right Earbud

VOLUME UP: Single tap
PLAY / PAUSE: Double tap
TRACK FORWARD: Press & hold 1+ sec

Both Earbuds

ANSWER CALL: Single tap
HANGUP: Double tap
REJECT INCOMING CALLS: Press & hold 1+ sec
EQ CHANGE: Triple tap

Tap either the right or left earbud 3 times for different EQ settings (GO Air Pop will cycle 3 EQ settings).

• JLab SIGNATURE: JLab Signature sound with amplified bass and vocals.
• BALANCED: Even sound with no additional enhancements.
• BASS BOOST: Amplified bass and sub-bass.