PDP Rock Candy Switch Wired Controller - Princess Peach

If you are using the Pro Controller Wired Communication mode, the Pro Controller's NFC capability will be turned off. If you want to use Amiibo, you'll need to unplug your Pro Controller and use the official Nintendo Joy-Cons or Pro Controller.

This controller is designed and produced exclusively for Nintendo Switch and is not compatible with PC.

If the controller is drifting or seems like it’s moving by itself, please try recalibrating the controller using the following steps: 

1. Make sure your controller is unplugged from the Switch Dock. 

2. Press and hold the down button from the D-Pad. 

3. Connect the cable to the Switch Dock. 

4. Let go of the down button from the D-Pad. 

5. Press A button once. 

6. Rotate both analog sticks 4 times (Clockwise). 

7. Press the down button from the D-Pad. 

If the controller is not getting power or not turning on, check the following: 

• Ensure the controller is connected to the Switch Dock via a USB cable. 
• Press and hold the Power button on the switch until you see Power Options, then select Turn Off. After a couple of seconds, turn the Switch on and press A three times on the Joy-Cons. Navigate to System settings, then select Controllers and Sensors. Select Change Grip/Order and press L/R on the PDP controller to connect. 

If the controller is not getting power or not turning on, check the following: 

• Ensure the controller is connected to the Switch Dock via a USB cable. 
• Press and hold the Power button on the switch until you see Power Options, then select Turn Off. After a couple of seconds, turn the Switch on and press A three times on the Joy-Cons. Navigate to System settings, then select Controllers and Sensors. Select Change Grip/Order and press L/R on the PDP controller to connect.