Ring Video Doorbell (2nd Gen) - Satin Nickel

1. Undo the security screws and remove your doorbell from its bracket .
2. Press and hold the orange setup button on the back of the device for 10 seconds.
3. Once the reset is complete, the doorbell will enter setup mode.

1. Open the Ring app.

2. Tap the menu (≡) on the top left.

3. Tap Devices.
   • Tap the Ring device you want to check.
4. Tap Device Health.
   • Battery Level is under Power.

If you are experiencing issues scanning the QR code:

• Ensure you are in a well lit area.
• Move your camera closer or further from the QR code to help it focus.
• Once your camera finds focus, hold it steady for a few seconds.
• If your camera won’t focus, clean your camera lens, move to a well-lit area, and try again.

If you continue to experience issues, please follow these additional steps:

1. Tap Other Options below the scanner.
2. Select Can’t Scan the QR code.
3. Select Enter Code Manually (this corresponds to PIN code digits underneath the QR code).
4. Find your device in the list.
5. Enter your five digit PIN located below the QR code.