Spear & Jackson 40cm Corded Chainsaw - 2000W

If your chainsaw cut is poor, please check the following:  

Ensure the chainsaw is turned off before carrying out any inspection or maintenance.  

Check your user manual for the below procedures.  

• Ensure the saw chain is correctly installed. 
• Check the saw chain tension. 
• The saw chain maybe blunt. Sharpen the cutting teeth or replace the saw chain. 

If your chainsaw guide bar and saw chain is overheating, please check the following:  

Ensure the chainsaw is turned off before carrying out any inspection or maintenance.  

Check your user manuals for the below procedures.  

• Ensure the chain tension is not too tight.
• Check the chain oil tank and fill if necessary. 

If your chainsaw motor runs but the saw chain does not rotate, please check the following:  

Ensure the chainsaw is turned off before carrying out any inspection or maintenance.  

Check your user manual for the below procedures.  

• The chain brake maybe blocking the saw chain. Check and release the brake chain. 
• Chain tension is too loose or too tight. Adjust the chain tension. 
• Check the chain oil tank and fill if necessary. 

If your chainsaw fails to start, please check the following:   

Ensure the chainsaw is turned off before carrying out any inspection or maintenance.

• Ensure the chainsaw is plugged into the mains power and turned on. 
• Check that the RCD outlet has not tripped. 
• Check that the chain brake is not engaged.  
• Check that the safety trigger or lock‑off button has been activated properly. 
• Check if the chain is jammed or seized. 

(Check your user manual for the above procedures).