Bush WMSAE912EB 9KG 1200 Spin Washing Machine - Black

Please select the 'request technical information' button at the top of this page and complete the form.  Once your repairer status has been confirmed, you will be sent the relevant technical information via email.

Cotton 90 degree:
Maximum load is 9kg. The temperature can be set lower if needed. This means the drum can be full with light wear clothing. I.E. t-shirts, vests, nightwear or bedding. If the Clothing is heavier i.e. jogging bottoms, sweatshirt, jeans or towels you can only put a few of these in, (4.5kg) otherwise you will be overloading.
Cotton Pre-wash:
Maximum load is 9kg. The temperature is set at 60 degree. You can lower the temperature on this program. This means the drum can be full with light wear clothing. I.E. t-shirts, vests, nightwear or bedding. If the Clothing is heavier i.e. jogging bottoms, sweatshirt, jeans or towels you can only put a few of these in, (4.5kg) otherwise you will be overloading.
Cotton 60 degree:
Maximum load is 9kg. You can lower the temperature if needed. This means the drum can be full with light wear clothing. I.E. t-shirts, vests, nightwear or bedding. If the Clothing is heavier i.e. jogging bottoms, sweatshirt, jeans or towels you can only put a few of these in, (4.5kg) otherwise you will be overloading.
ECO 40-60:
Maximum load is 9kg. You will not be able to change the temperature from either 40-60 degree. This means the drum can be full with light wear clothing. I.E. t-shirts, vests, nightwear or bedding. If the Clothing is heavier i.e. jogging bottoms, sweatshirt, jeans or towels you can only put a few of these in, (4.5kg) otherwise you will be overloading.
Cotton 20 degree:
Maximum load is 4.5kg. This program will only wash at 20 degree, you will not be able to change the temperature. This is for your less dirty cottons. This should never be more than half full, if it half full that should be light wear clothing, i.e. underwear, night wear, tablecloths or a bed sheet. If you are going to wash towels with this program, you should not exceed 2kg.
Easy care:
Maximum load is 3.5kg. This program will wash at 40 degrees, you will be able to change the temperature to 30 degree but not higher. This program should never be more than half full, with only light weight clothing. This one can be for you blouses/shirts or trousers.
Wool:
Maximum load is 2.5kg. This is less than half full. This program will wash at 30 degree and won’t be able to change the temperature. Should only be a few items going into the drum.
Rinsing:
Maximum load 9kg. This program can be used if you would like additionally rinse your clothing. You can use this program for any type of clothing. If the items are light weight i.e. t-shirts, vests, night wear, table cloth or bedding you can fill the drum to maximum load. If the item is heavier, i.e. sweatshirt, towels, jeans or jogging bottoms, only put a few of these items in.
Spinning:
This program can be if you would like to spin your laundry out extra. You can select any spin speed.
Hand wash/delicate:
The maximum load is 2.5kg. This is less than half full, only a few items. This program is set at 30 degrees, you will not be able to change the temperature. The spin speed will be on the lowest. This is for your delicate or anything that has to be hand washed.
Colours 40 degrees:
The maximum load if 3.5kg, the drum should never be more than half full with light weight items, i.e. bed cloth, night wear, t-shirts or vests. If you are to wash more heavier items, i.e. towels, sweatshirts, jeans or jogging bottoms, should only be a few of these items. You can change the temperature to 30 degree but nothing higher.
Mixed:
The maximum load if 3.5kg, the drum should never be more than half full with light weight items, i.e. bed cloth, night wear, t-shirts or vests. If you are to wash more heavier items, i.e. towels, sweatshirts, jeans or jogging bottoms, should only be a few of these items. You will not be able to change the temperature.
Blouses/Shirts:
The maximum load is 4kg, the drum should never be more than half full. Due these items being light weight you can fill to just below half full. The temperature is set at 60 degree and can be lowered if needed.
Fast 60 degree:
The maximum load is 4kg. This is below half full, this can be used as a daily program. Can be used for any clothing. You can lower the temperature if needed, you can also change the spin speed.
Rapid 15 min:
The maximum load is 2kg. This is below half full. This cycle is more for light weight, not so dirty clothing. This program is set at 30 degree, you will not be able to change the temp. Due to the length of the program the spin speed will be the lowest as the program does not have time to reach the fastest. You will be able to do an additional spin if needed.

This would indicate the door is not shut properly. 

• Check that there is nothing preventing the door being closed, then firmly re-close the door so that you hear a click.  

If the problem persists, turn off the machine, unplug it from the mains, then call technical support. 

This is indicating that your machine is not filling with water properly. The pressure of your water supply may be low, or the water supply may be blocked.  

• Check the water pressure by running a tap. 
• Ensure the water supply tap is turned on. 
• Check that the water inlet hose is not kinked. 
• Remove the water inlet hose and clean the inlet filter. (Check the instruction manual for this procedure). 
• Remove and check the water filter for any blockages. (Check the instruction manual for this procedure). 

If the problem persists, turn off the machine, unplug it from the mains, then call technical support. 

This is indicating that water is not draining from your machine. 

• Turn off the machine and unplug from the mains. 
• Remove and clean the pump filter. (Check the instruction manual for this procedure). 
• Check the drain hose for kinks or blockages. (Check the instruction manual for this procedure). 

If the problem persists, turn off the machine, unplug it from the mains, then call technical support. 

This indicates there is an excessive amount of water in your machine. 

• Your machine will discharge water automatically. When this occurs, switch off the machine and unplug it.  
• Turn off the water supply. 
• Call technical support.