Bush Portable DAB / FM Radio - Black

If you are missing radio stations, we would recommend performing an automatic channel scan on your radio and trying the following:

• Move the radio to an open location, close to a window if possible.
• Locate it further away from other devices to avoid any interference.
• Extend the antenna fully and, if necessary, adjust to receive the strongest signal.

If you are still missing stations, it may be down to your signal coverage. You can check the digital signal coverage in your area using this website here.

We would recommend checking the following if your radio has no sound:

• Ensure the volume is turned up fully.
• Check if this is occurring on all stations, as it may be down to poor signal from a particular station.

If the issue is still occurring, try a power reset:

1. Disconnect the radio from mains/battery power.
2. Holding down Power/Standby button for 30 seconds.
3. Reconnecting the radio up and trying again.

If this has not resolved the issue, please use the contact details on this page to get further support.

To make the most out of your radio and get better signal we recommend the following:

• Move the radio to an open location, close to a window if possible.
• Locate it a bit further away from other devices to avoid any interference.
• Extend the antenna fully and, if necessary, adjust to receive the strongest signal.

For more information about the digital radio signal in your area, we would advise checking the signal information on this website here.

To check the stations available in your area, please use this online postcode checker provided by getdigitalradio.com here.

If the radio has no power, try the following:

• Quick press the Standby button to ensure it is not in Standby mode.
• Try an alternative mains plug socket.
• Change the fuse in the plug.

If the issue remains, please get in touch with the support team by using the contact details on this page.

1. Press Menu/info button. Scroll to “System” press Select.
2. Use the Tune + or Tune — button to select “Alarm”.
3. “Alarm 1” will be displayed and press Select.
4. “Alarm 1 wizard on time” will be displayed and the hours will flash.
5. Use Tune + or Tune — to navigate to desired time.
6. Press select to go to minutes and use the Tune + or Tune — to navigate to desired time and press Select.

1. Whilst a radio station is selected press and hold the Menu button.
2. Full scan will appear on the display, press the select button to begin the scan.

1. Tune radio to station that you wish to preset.
2. Press and hold the Preset button until “<Preset Store <1(Empty)>” is displayed.
3. Press the release Tune + or Tune – button to scroll to the preset to desired location.
4. Press and release Select button the display will confirm “Preset X Stored” Where “X” is the number (1-10).

1. Press the Tune — or Tune + buttons to scroll though the station list to the desired station.
2. Press the Select button. It will tune to the selected station.

1. Press the Power button to turn on the radio.
2. Press and hold the Power button to turn off the radio.

Note: When you Power off the radio when using mains power, it will go to Standby mode. When using batteries, the radio will power off completely and will not go to Standby mode, to save battery power.