Beurer Portable Compact Nebuliser

If your device will not switch on, check the following:

• Ensure the battery is fully charged. Check that the USB‑C cable is connected and the mains adapter is plugged in correctly.
• Ensure the medication container is properly attached. The device will not operate unless the container is properly slid onto the housing and locked.

If there is no nebulisation or the nebulisation is weak, check the following:

• Check that the liquid is not too low. Top up the medication container (do not overfill).
• Clean the mesh. Fill 1.5–2 ml cleaning solution into the opening and activate self‑cleaning by holding the On/Off switch for 3 seconds.
• Ensure the lid is tightened clockwise until alignment marks match.

If the the nebuliser leaks fluid, check the following:

• Ensure the device has not been overfilled.
• Check that the lid is not misaligned – Ensure the lid clicks/aligns when tightened clockwise.