LG SH5 2 1CH 320W WIRELESS SUBWOOFER

1. Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. 
2. Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. 
3. Previous setting may not be saved when device power is shut off.

1. The power cord is unplugged. Plug in the power cord. 
2. Check the condition by operating other electronic devices.

1. Incorrect input source is selected. Check the input source and select the correct input source. 
2. The mute function is activated. Press (Mute) or adjust the volume level to cancel the mute function. 
3. When you are using connection with a external device (set top box, Bluetooth device etc.), adjust volume level of the device.

1. The power cord of the subwoofer is not connected. Plug the power cord into the wall outlet securely. 
2. Pairing between the unit and the subwoofer gets disconnected. Connect the unit and the subwoofer.

1. The remote control is too far from the unit. Operate the remote control within about 7 m. 
2. There is an obstacle in the path of the remote control and the unit. Remove the obstacle. 
3. The batteries in the remote control are exhausted. Replace the batteries with new ones.

1. Check connection of the external device such as TV, DVD/Blu-Ray player or Bluetooth device. 
2. Check the state of SIMPLINK and turn off SIMPLINK. 
3. Depending on the connected device, this function may not operate.

1. Check whether your LG TV supports LG Sound Sync. 
2. Check connection of LG Sound Sync (Optical or wireless). 
3. Check sound setting of your TV and this unit.

1. The power cord is unplugged. Plug in the power cord. 
2. Check the condition by operating other electronic devices.

1. Incorrect input source is selected. Check the input source and select the correct input source. 
2. The mute function is activated. Press (Mute) or adjust the volume level to cancel the mute function. 
3. When you are using connection with a external device (set top box, Bluetooth device etc.), adjust volume level of the device.

This message will show when the TV is not receiving a signal, either through the aerial or an external device connected.

Ensure you have selected the correct input source for viewing (for example, HDMI if you have an external device connected to the TV via HDMI). If you are using an aerial to watch the inbuilt Freeview channels, change the input source to Digital or DTV to view these channels.

If you have purchased a universal remote, it should come with an instruction guide as to how to pair the remote with the TV. It will often have a list of codes for different brands. Locate the codes for this brand of TV, and follow the instructions to pair together.

Check that all connections are fully inserted on both your TV and viewing source (for example, an aerial or a Sky box). If the issue persists, please try the following.

1. Unplug the TV from the wall and disconnect any external devices.
2. Hold down the manual button on the unit for 30 seconds (if unsure of location please refer to the user manual).
3. Plug the TV back into a mains socket.

Please see how to perform a power reset here: 

If the TV is missing some channels, we would recommend carrying out an automatic channel scan to tune in these channels, and if necessary trying a First Time Installation or Factory Reset through the menu.

If this has not resolved the issue, you can check for any issues with the signal in your area using the Freeview website here.

You can use a digital aerial on this TV to access Freeview channels. This can be an external aerial that has been fitted by an engineer, or an indoor aerial that you can purchase and fit yourself.

If purchasing an indoor aerial, we would recommend checking the distance from the transmitter as aerials will have a different range specified on the product box. You can check the distance from your nearest transmitter using the Freeview coverage checker here.

This should help to identify what aerial you will need, and what distance range would be required for your location.

Ensure the TV is plugged into a mains socket and, if necessary, try an alternative mains socket. An extension lead does not always supply the TV with sufficient power, so the TV may not be able to turn on fully if connected this way.

We would recommend trying the below steps:

1. Unplug the TV from the wall and disconnect any external devices.
2. Hold down the manual button on the unit for 30 seconds (if unsure of location please refer to the user manual).
3. Plug the TV back into a mains socket.

Please see how to perform a power reset here: 

• Check that the unit is not in standby by giving the power button/on/off button a quick press. 
• Try an alternative mains plug socket. 
• Change the fuse in the plug.

• Ensure you have selected Bluetooth mode on the soundbar. 
• Try disconnecting and reconnecting via Bluetooth. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again. 
• Ensure the device you are trying to connect to can send sound. If you are trying to connect with another speaker this will not work as the soundbar can only receive the sound, and cannot send sound.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have the correct mode selected. For example, Bluetooth. 
• Ensure any cables are securely fitted. 
• Ensure there are no audio devices nearby which may be disrupting the signal.

• Check that the unit is not in standby by giving the power button/on/off button a quick press. 
• Change the batteries in the remote. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again. 
• Try a camera test on the remote to check for the infrared signal. Put your smartphone in selfie mode, point the remote at the camera, and press some buttons. If the remote is working you should see a flicker at the end of the remote. If there is no light, it would indicate the remote is not producing a signal.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have selected AUX mode on the soundbar. 
• Turn on headphone volume on the connected device. If a TV, this is usually found within the sound menu. 
• Disconnect and reconnect the AUX cable. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have selected Bluetooth mode on the soundbar. 
• Try disconnecting and reconnecting via Bluetooth. 
• Unplug the unit from the wall, hold down the power button for 10-15 seconds, plug back in, and try again.

• Adjust the volume to the preferred level. 
• Increase the volume on the device connected to the soundbar. 
• Ensure you have selected Optical mode on the soundbar. 
• Disconnect and reconnect the Optical cable. 
• Change the TV’s sound setting to match the external speaker connected. For example, you may have an option for PCM (pulse-code modulation) which you can set. This is necessary to ensure the audio format matches that of the sound bar you have connected.

1. Press the Settings buton.
2. Navigate to All Settings.
3. Navigate to General.
4. Navigate to Channels.
5. Navigate to Channel Tuning.
6. Navigate to Auto Tuning.
7. Select 'Start'.