Therabody Wave Duo Vibrating Ball

To turn on the WaveDuo, firmly press and hold the power button for 1-2 seconds. 

Press the main button to increase speeds. After the highest speed, if the button is pressed again the WaveDuo will come back to the lowest speed. 

Place the device under the treatment area gradually applying light to moderate pressure as needed. 

To turn off the WaveDuo, firmly press and hold the power button until the device turns off.

Ensure that the device is powered off before charging, the device will not power on while charging. 

After turning off the device, plug the power adapter into the charging port. 

The LED light on the power button will flash until fully charged.

Charging is complete when the LED light on the power button is solid green. 

Batter level is continuously displayed on the LED Light of the power button when the device is on. 

To view the battery level when the device is off, briefly press the power button and the LED battery light will flash to indicate the battery level.

• The WaveDuo NOT waterproof. Do not allow any liquid or water to enter the device or charging port and avoid applying alcohol-based cleaner.
• Ensure that the device is powered off before cleaning. 
• To clean, wipe the device surface with a disinfectant wipe to remove any residue. 
• Once the device is residue-free, use a clean disinfectant wipe to thoroughly clean the device surface, wiping in a circular motion.