DYSON V8 ADVANCED
215/0800
Product details
- Brand: Dyson
- Catalogue number: 215/0800
- Manufacturer's number: 492637-01
Dyson Support
UK:
Eire:
Argos Troubleshooter
Resolve problems quickly with this easy-to-use tool.
Email me this page
Enter your email address to have this page emailed to you *
FAQs
A full charge takes up to 5 hours.
Yes, the battery is designed to be left on charge, to ensure your vacuum is ready for the next use.
We recommend charging your machine after every clean to maximise run time.
This will usually be around once a month, but may be more frequent if you use your machine more heavily. After cleaning the filter, always leave it to dry for at least 24 hours. You must ensure it's completely dry before refitting. We recommend following the cleaning instructions and cleaning by hand. The filter is not suitable for dishwasher use.
We’ve re-engineered the Dyson Motobar™ cleaner head to include de-tangling technology. While it still powerfully sucks up dust and hair from all floors, we’ve added a de-tangling comb that automatically clears hair from the brush bar.
The de-tangling comb on the brush bar has 56 polycarbonate vanes to prevent tangling around the bristles. The comb is always in contact with the brush bar as it spins to prevent wrapping, so hair is sucked straight into the bin.
How to clean your filters
1. Remove your Dyson filters
Lift the filter out of the cyclone assembly (filter A). Twist and remove the filter at the back of your machine (filter B).
2. Remove excess dust
Tap your filters lightly to remove any loose dust and debris.
3. Wash filter A
Hold under running water and squeeze gently until the water runs clear. Squeeze and twist filter to remove excess water.
4. Wash filter B
Wash the inside under cold, running water. Repeat until the water runs clear. Firmly shake the filter until no water comes out.
5. Leave to dry for 24+ hours
Dry your filters in a well-ventilated, warm place for at least 24 hours. Place filter B with the open end facing upwards. Your filters must be completely dry before you put them back into the machine, or it could damage the motor.
6. Refit the filters
Screw filter B onto the back of your machine, rotating clockwise. Push filter A back into the cyclone assembly.
Questions & answers
How-to videos
-
How to change your plugs fuse
-
How to solve suction issues on your vacuum
-
How to clean your Dyson V8™ cordless vacuum's filters
-
How to set up and use your Dyson V8™ cordless vacuum
-
How to empty the bin on Dyson V8™ Cord-free vacuums
-
How to wash your Dyson V8 and V10 cordless vacuum's soft roller cleaner head
Interactive Help
-
Argos Troubleshooter
Resolve problems quickly with this easy-to-use tool.
Returns policy
If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.
If you still need to return your product then please visit our most up to date returns policy here.
