Turtle Beach Recon Xbox & PC Wired Controller - White

Yes, with limited functionality. The Recon controller can be used with a wireless headset, but there will be limitations. As there is no headset physically connected to the controller's headset jack, the volume controls on the controller itself will be disabled. Instead, you will need to use the volume controls on the headset itself.

No. The audio features provided by the controller -- including Presets and Superhuman Hearing, as well as Game and Chat balance -- are only engaged when a wired headset is physically plugged into the controller's headset jack. A wireless headset does not use that connection, and has its own independent connection directly to the console.

With a WIRELESS HEADSET: No. A wireless headset does not get assigned to the controller; as long as the headset is set as the default input and output device, you would not need to configure any additional settings.

With a WIRED HEADSET: Yes. You would need to follow the standard Xbox procedure for setting up a wired headset for the first time.

This process is as follows:

1. Securely plug the headset in to the controller's headset jack.
2. Make sure the controller is assigned to the profile you are logged into/using.
3. Configure the audio settings for both the console and the game in question to your preference.

On the Recon Controller, you can remap any of the controller buttons to the Left and Right Quick-Action buttons and save them to a profile. The Quick-Action buttons are the buttons located on the back of the controller.

PLEASE NOTE: When re-mapping a button to the Right Quick Action button, make sure to turn Pro-Aim OFF, as this will affect the button that is mapped to that Right Quick Action button. In addition, the controller's firmware will need to be updated in order to re-map certain buttons to the Quick Action-buttons.

To start the mapping process:

1. Click on the Mode Button and cycle until you on to the Button Mapping option (the LED with the image of the controller will light up).
2. Once the Button Mapping icon lights up, press the Select Button to choose a profile. Once you reach the right profile, activate mapping mode by holding down the select button for 2 - 3 seconds or so.
3. After doing that, press the Quick-Action button (left or right button on the back of the controller) that you want to map to.
4. Then, press the button on the controller that you wanted to assign to the Quick-Action button. After doing that, press and hold the Select button for 2- 3 seconds again. That should save the assignment that you've made.