NINJA LUXE CAFE BLACK ES701UKBK

There could be several reasons behind this.

• The grind size is too fine: Let the brew time out and follow the recommended grind setting on your next brew.

• Basket cleanliness: Before grinding, ensure the basket is free of any clogs or debris that could impede the flow.

• The machine needs to be descaled: Follow the Cleaning & Maintenance section in the instruction manual.

• Preheat the portafilter: Rinse the portafilter under hot water before grinding. Please make sure that the basket is completely dry before grinding.

• Preheat the cup: Rinse the cup under hot water before brewing to increase the temperature of the brew.

• Adjust water temperature: See the Adjusting Brew Temperature section.

• Use heated froth settings: All froth settings are heated except cold foam, which is denoted with a snowflake.

• The machine needs to be descaled: Follow the Cleaning & Maintenance section in the instruction manual.

• To ensure the machine maintains the ideal pressure for espresso, during a brew, some water will bypass into the main drip tray. This is normal.

• The machine will automatically purge water from the steam wand into the main drip tray after each froth. This is to clean the inside of the steam wand.

• The main drip tray is designed to hold the water bypass from the creation of up to 6 cappuccinos.

• The machine will automatically purge water from the steam wand into the main drip tray after each froth. This is to clean the inside of the steam wand.

• Drip tray is full: Check the empty indicator to see if you need to empty the main drip tray. Follow the Cleaning & Maintenance section in the instruction manual.

• The water reservoir is not seated firmly: Check that the water reservoir is firmly seated in its place on the back of the machine.

• Ensure the machine is plugged into a working socket.

• After plugging the machine in, press the POWER button.

• To save power, the machine will automatically shut off after 20 minutes.

• Check if you have beans in the bean hopper.

• Press START GRIND to begin grinding.

• If there are beans in the bean hopper and you are getting an ADD BEANS notification, unplug the machine and gently push the beans down toward the burrs.

• Ensure the bean hopper is securely and properly inserted.

• Ensure the portafilter with the funnel assembled is properly installed into the grinding cradle. Remove and reinsert to ensure it is installed correctly.

• Using the cleaning brush, clear out any material sitting inside the grinding cradle.