One For All URC1280 Contour Universal Remote Control

Before resetting the Contour, please take the following into account:
If you have ever sent in your remote control to our Upgrade Service for an update, these codes will be erased as well.
In that case, it is highly advised not to perform a factory reset.

To reset your remote to the manufacturer's setting please use the following procedure:

1. Remove a battery from the remote and press a button with it removed
2. Reinsert the battery – the LED should blink twice
3. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice
4. Enter the code 9 8 1, the LED will blink 4 times
5. The remote is now reset to its factory defaults.

You can now setup your remote again.

If you would like to reset a device mode, please use the following procedure:

1. Hold down SETUP until the light blinks once and then twice .
2. Enter the code 992 (the light should blink twice).
3. Press twice the device key to reset, the light will blink twice.
4. The device key has now been deactivated.

Additional Information: Mode reassignment erases all Key Moved and learned keys for that mode.