One For All URC1921 Sharp TV Replacement Remote Control

Before resetting the replacement remote, please take the following into account:

If you have ever sent in your remote control to our Upgrade Service for an update, these codes will be erased as well. In that case, it is highly advised not to perform a factory reset.

To reset your remote to the manufacturer's setting, please follow the procedure outlined below:

1. Remove a battery from the remote and press a button to discharge the remote entirely
2. Reinsert the battery – the LED should blink twice
3. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice
4. Enter the code 9 8 1, the LED will blink 4 times
5. The remote is now reset to its factory defaults

You can now setup your remote again.

N.B. The procedure must be performed within 6 seconds of applying power to the remote, that is, inserting batteries. After 6 seconds of Power it will not activate. 

Some Sharp TV’s are controlled with a remote by Radio Frequency (RF).

Our Sharp replacement remote controls via Infrared (IR) and does not support RF.

Please check your TV’s manual if your TV is controlled via Infrared.