One For All WM6661 Tilt and Swivel 32-90 In TV Wall Bracket

Please make sure the mounted TV is within the supported weight range of the bracket.

Drooping up to 5 degrees is normal for a bracket with extended arms. This is due to gravity. The bracket has been designed with negative tilting to compensate for that and make sure the front of your TV is still straight. When you notice drooping, tilt the TV a bit backwards to compensate.

When folded back against the wall, the arms of the wall mount have been designed to be leveled when they are correctly folded in.

But, for example, when the TV is back against the wall and the arms are turned completely extended to one side, this can result in the TV being not level exactly. Please make sure you always fold the arms when positioning the TV close to the wall.

Please use the longer screws from the screw set. It could be possible that you need longer screws than the ones included in the set. In this case, the necessary screws will be available at any hardware store.