LawnMaster 16cm Cordless Robotic Lawnmower - 24V

If your robotic lawnmower has stopped while mowing, please check the following: 

Ensure the robotic lawnmower is turned off and the battery is removed before carrying out any inspection or maintenance. 

• Check for any grass or debris wrapped around the wheels.
• Wearing protective gloves check for and remove any grass or debris wrapped around the blade disc.
• To prevent your robotic lawnmower from getting stuck, fill any dips or holes in the lawn with topsoil and seeded with grass seed.

If your robotic lawnmower fails to start, please check the following: 

Ensure the robotic lawnmower is turned off before carrying out any inspection or maintenance.

Check your user manual for the below procedures. 

• Check that isolator key is correctly fitted.  
• Ensure the battery is correctly fitted and fully charged.
• Remove the isolator key and battery. Wearing protective gloves check underneath the robotic lawnmower and clear any grass or debris.
• The grass maybe too high, adjust the cutting height.  

If your robotic lawnmower vibrates, please check the following: 

Ensure the robotic lawnmower is turned off and the battery is removed before carrying out any inspection or maintenance. 

Check your user manual for the below procedures. 

• Check that the cutting blades screw has not become loose.
• Check the cutting blades for any damage.
• Check that only one blade is fitted at each screw and that the blades are not stuck.

If the grass is being cut unevenly, please check the following: 

Ensure the robotic lawnmower is turned off and the battery is removed before carrying out any inspection or maintenance. 

Check your user manuals for the below procedures. 

• The work area may be too big. Adjust the borders/protections to decrease the size of the mowing area. Recharge the battery to mow the area twice or purchase an additional battery to increase the size of the cut area.
• The cutting height is too low, or the grass is too long. Increase the height of the cut.
• The cutting blades may be blunt. Replace all the blades and screws.