Sovereign Petrol Grass Trimmer - 26CC

The mixture ratio is 40:1, 40 parts fuel, to 1 part Two-stroke oil.

While accelerating the machine in a grassy area, simply lightly bump the nose of the machine on the ground, this should dispense more line.

You can use E10 with your appliance but we advise taking caution with fuel as you would with any petrol powered device. E10 fuel contains 10% bio-ethanol, more than its predecessor. This essentially means it has a higher risk of attracting more water and moisture than E5. 

We recommend the following to best maintain your appliance:

• Only use the required amount of petrol and avoid any overfilling.
• Completely drain any excess petrol by using the appliance until it physically stops.
• Store any extra fuel in an airtight can and keep out of direct sunlight.

If the strimmer is not turning or spinning at all, check the following: 

• Check that there is not a build-up of grass clipping and debris. Before removing the clippings, ensure the strimmer is powered off completely and unplugged. Once any clippings are removed, carefully check to see if there is movement when turning. 
• Check nothing has trapped itself around the spinning element (such as garden twine or wire. 
• Check the strimmer has sufficient power. If it is a cordless strimmer, ensure the battery is charged or the fuel tank has been filled. If it is a corded strimmer, ensure it is connected to power. 
• Clean the vents of any debris to ensure proper airflow. 

If the strimmer is not cutting or is cutting poor, check the following: 

• Clean the vents of any debris to ensure proper airflow. 
• Check that there is no damage to the blades or lines. If there is any damage, you may need to sharpen or replace the blade or lines. Refer to your user manual for how to proceed with this. 
• Check nothing has trapped itself around the spinning element (such as garden twine or wire. 
• Check that there is not a build-up of grass clipping and debris. Before removing the clippings, ensure the strimmer is powered off completely and unplugged. Once any clippings are removed, carefully check to see if there is movement when turning.

If the cutting line is breaking or getting tangled, check the following: 

• Check that there is not a build-up of grass clipping and debris. Before removing the clippings, ensure the strimmer is powered off completely and unplugged. Once any clippings are removed, carefully check to see if there is movement when turning. 
• Check that the correct type and size of the cutting line is being used. Refer to your user manual for specifications for the cutting line and adjust the tension if necessary. 
• Avoid hitting hard objects like rocks or stones when cutting as this can result in the line breaking. 
• Ensure the right amount of strimmer line is used. Too much line can catch easily and break.