One For All WM4421 32 - 65 Inch Tilt TV Wall Bracket

Please use the longer screws from the screw set. It could be possible that you need longer screws than the ones included in the set. In this case, the necessary screws will be available at any hardware store.

Please make sure the mounted TV is within the supported weight range of the wall mount.

Drooping up to 5 degrees is normal for a wall mount with extended arms. This is due to gravity. The wall mount has been designed with negative tilting to compensate for that and make sure the front of your TV is still straight. When you notice drooping, tilt the TV a bit backwards to compensate.

When folded back against the wall, the arms of the wall mount have been designed to be leveled when they are correctly folded in.

But, for example, when the TV is back against the wall and the arms are turned completely extended to one side, this can result in the TV being not level exactly. Please make sure you always fold the arms when positioning the TV close to the wall.

When the wall you intend to install your wall mount to is hollow, visit your local hardware store for mounting materials dedicated for hollow walls.

Please use longer screws. These can be supplied with your television. If this is not the case the necessary screws will be available at any hardware store or use one or a combination of two different sizes of spacers.                                

The wall mount comes with all required mounting materials.  

When the wall you intend to install your wall mount to is hollow, visit your local hardware store for mounting materials dedicated for hollow walls.

When you intend to install your wall mount on a wall made of wood, please make sure not to use the plugs; the screw should go into the wood directly.

Please use the longer screws from the screw set. It could be possible that you need longer screws than the ones included in the set. In this case, the necessary screws will be available at any hardware store.