HoMedics Pro Physio Heat Massage Gun

It can take up to 2.5 hours to fully charge, for up to 3.5 hours of use.

1. Screw the desired massage head into the socket on the front of the product.
2. Turn the speed selector ring on the base of the product clockwise to your required speed setting, the speed indicator LED(s) on the back of the product will illuminate corresponding to the speed chosen.
3. Gently move the massage head over the part of the body you wish to massage at first and then apply more pressure as desired. 
4. You should massage each area for approx. 30 seconds to 1 minute.
5. If you wish to increase or decrease the speed of the massager, turn the speed selector ring accordingly.
6. Once you are finished with your massage, turn the speed selector ring to the 0 position to turn the massager off.

1. Screw the heated head into the massager.
2. Turn the speed selector ring to the desired speed.
3. Start massaging, the head will take 2 mins to get to full temperature, whilst the head is heating the LED’s will flash. Once the LED’s stay lit, the head is at full temperature.
4.  Use the massager on the desired area.
5. Once you are finished with your massage, turn the speed selector ring to the off position and allow the head to cool before putting back into the case.

1. Place the cool head in a freezer for at least 4 hours.
2. Screw the cool head into the massager.
3. Turn the speed selector ring to the desired speed.
4. Use the massager on the desired area.
5. Once you are finished with your massage, turn the speed selector ring
   to the off position and remove the cool head, placing it back into the
   freezer if desired.
6. Do not store the cold head in the case if it is damp due to condensation
   from recent use.

1.  To charge the product, plug the adaptor into a 220-240V mains outlet and connect the cable to the charging socket on the bottom of the handle.
2. Once the charging cable is connected the charge indicator LED’s should start to flash, this will indicate the product is charging.
3. The product will require 2.5 hours of charging for up to 3.5 hours of use.
4. Once the product is fully charged the indicator lights will remain fully illuminated.
5. Disconnect the product from the mains power supply once it is fully charged.

Make sure the device is unplugged from the mains supply and allow to cool before cleaning. Clean only with a soft, slightly damp sponge.

• Never allow water or any other liquids to come into contact with the appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.