Blink Outdoor Wireless Battery Smart HD CCTV Security Camera

• With standard usage and default settings, the battery can last up to two years.
• Usage patterns like frequent live streaming, extended recordings, and high motion detection frequency can shorten battery life.

• Yes, the Blink Outdoor camera requires a Sync Module for operation.
• The Sync Module acts as a hub connecting the camera to your home Wi-Fi network and Blink servers.

• The Blink Outdoor Wireless Battery Security Camera is rated IP65 weather-resistant, making it suitable for outdoor use. 
• It can withstand rain, snow, and extreme temperatures (-4°F to 113°F or -20°C to 45°C).

• Yes, the Blink Outdoor Wireless Battery Security Camera is equipped with infrared night vision for low-light conditions.
• You can also enable the infrared intensity settings in the Blink app for better clarity.

• Yes, the Blink Outdoor Camera integrates with Alexa-enabled devices.
• Use voice commands to view live feeds, arm/disarm cameras, or receive motion alerts on Alexa-compatible devices.

No, the Blink Outdoor Wireless Battery Security Camera requires a Wi-Fi connection (2.4 GHz network) to function.

• Check Signal Strength: Ensure the camera has a strong signal to your Wi-Fi network. If the signal is weak, try moving the camera closer to the Sync Module or your router.
• Router Compatibility: Ensure the camera is connected to a 2.4 GHz Wi-Fi network (Blink cameras do not support 5 GHz networks).
• Restart Equipment: Power cycle your router and restart the Sync Module.
• Battery removal/replacement: Remove and reinsert the camera’s batteries. 

• Check Signal Strength: Weak Wi-Fi signals can cause pixelated or delayed video. Move the camera closer to the Sync Module or router.
• Adjust Camera Settings: Go to the camera settings in the Blink app and reduce the video quality settings if needed.

• Replace Batteries: Use new AA 1.5V Lithium batteries (not rechargeable).
• Clean Battery Contacts: Ensure the battery contacts are clean and free of debris. 
• Reset the Camera: Press and hold the reset button (usually near the battery compartment) until the light flashes red.