Russell Hobbs RHTTLF2E1SS Table Top Fridge - Stainless Steel

• Check that there is not too much food in the appliance. 
• Check that the thermostat is set to a suitable temperature. 
• Check that the appliance is not placed in direct sunlight, or too near to a heating source. 
• Check that the ambient temperature is within the operation limits of the appliance.

Increase the working temperature by adjusting the thermostat to a lower setting. 

The highest setting should only be used as a rapid cool setting and should only be set 2 hours before a large amount of food is placed in the fridge. If this is not done the temperature in the fridge compartment could fall below 0ºC as the compressor will run continuously

Check all the food and drink that is in the fridge is in date and correctly packaged. 

If it isn’t then it should be removed immediately or repackaged. Check for spillages on each shelf, rack and drawer. 

You may need to remove the drawers to check that no spillages have settle underneath them. 

As spillages that have not been cleaned and have been left can cause smells and unwanted odours.

Ensure there are no obstructions preventing door closure. 

Check the door compartments and shelves are correctly in place. 

Check the door seal is not warped or torn. Check the appliance is level.

• Check that the appliance is on a flat, level surface and is stable. 
• Check the spacing's around the appliance and ensure it is not touching other items. 
• Bubbling and gurgling sound: • This noise is emitted as the coolant fluid flows through the pipes within the system. This is normal. 
• Water flowing sound: • This is the normal sound of water flowing into the drain trough during the defrosting process. If the appliance is operating noisily (compressor noise): This is normal. This noise indicates that the compressor is operating normally. As the compressor is being energized, it might run a bit more noisily for a short period of time