Ninja BC151UKBK Blast Portable Hand Blender - Black

1. Install vessel by aligning the arrow on the back of the vessel with the arrow on the back of the base. Turn unit on by pressing the button until the the LED icon illuminates. 
2. Add ingredients, starting with liquids then solid ingredients. If using ice, always add to the vessel last. Secure the lid onto the vessel. 
3. Blend: Press the Start/Stop button. The unit will run for 30 seconds. To stop the program sooner, press the Start/Stop button again. 
4. When blending is complete, press the button to turn the unit off.

• After blending, rinse vessel, lid, and blade assembly under warm water. 

• To clean, add warm water up to MIN LIQUID line, then add 1 small drop of washing up liquid. Securely attach the lid and blend. Empty contents and rinse under warm water

For a deeper clean:

• Both vessel and lid are top-rack dishwasher safe. These parts should NOT be cleaned with a heavy cycle. 
• After disassembling the vessel and lid, rinse blades and use a dish washing utensil to clean blades. 
• Wipe motor base with a clean, damp cloth. Motor base is water resistant, HOWEVER the motor base is NOT dishwasher safe. DO NOT submerge base in water. 

1 Check ingredients: 

• Ensure ingredients aren’t above MAX FILL Line. 

• Ensure there is enough liquid. Fill to or above MIN LIQUID line. 

2 Dislodge Blockage: 

• Shake unit to remove blockage. 

• Turn unit upside down and restart blending.

• Turn unit off and remove blockage from blade using long utensil. Restart unit.

Press and hold the power Button to turn the cordless blender ON and OFF

Set the assembled motor base and vessel on a level surface. Carefully place the sip lid on the top of the vessel and align the threads so the sip lid sits flat. Turn clockwise until you have a tight seal.

Set the motor base on a level surface. Place the vessel on the top of the motor base and align the threads so the vessel sits flat. Turn clockwise until you have a tight seal. The LEDs on the display will be solid purple when the vessel is properly installed.