Braun Silk-expert IPL Hair Removal System

• Plug the mains cord into an electrical outlet. 
• Plug the power supply into the power socket. 
• The LED power bars will light up once and, a fan starts running. 
• This means the device is in READY mode. 
• During operation, the device will heat up slightly.

After use, wipe down the device and especially the treatment window with a dry, lint-free cloth. Do not rinse or immerse the device in water or any other liquid. To ensure maximum performance, it is important to keep the treatment window reflector free from dirt, hair or other debris. To aid in the cleaning of this part, the front section is removable. Once removed, it can be cleaned with a slightly damp cloth. Always ensure the front section is completely dry before re-fitting it. Store the device in a cool, dry place. Make sure the treatment window and skin sensors are protected from damage.

Remove any visible hair on the skin before using the device. You may use your preferred hair removal method. Clean the treatment area and pat it dry.

Make sure the device is connected to an electrical outlet and in Ready mode. Ensure both skin tone sensors are in full contact with the skin. If needed, move the device in a way that both skin tone sensors get skin contact.

Both skin tone sensors must be in contact with the skin. If the area to be treated is too small or curved, no valid skin tone can be read and the device cannot be activated. Reposition the device to ensure both sensors make contact with the skin.

Invalid skin tone reading. Your skin is either too light or too dark. For safety reasons, the device cannot be activated.