One For All URC6821 Big Button Universal Remote Control

Before resetting the Big Button, please take the following into account:

If you have ever sent in your remote control to our Upgrade Service for an update, these codes will be erased as well.

In that case, it is highly advised not to perform a factory reset.

To reset your remote to the manufacturer's setting please use the following procedure:

• Remove a battery from the remote and press a button with it removed
• Reinsert the battery – the LED should blink twice
• Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice
• Enter the code 9 8 1, the LED will blink 4 times
• The remote is now reset to its factory defaults.

You can now setup your remote again. 

If you would like to reset a device mode, please use the following procedure:

1. Hold down SETUP until the light blinks once and then twice.
2. Enter the code 992 (the light should blink twice).
3. Press twice the device key to reset, the light will blink twice.
4. The device key is now reset.

To move a particular key within the same device mode:

1. Press the relevant device key once.
2. Press and hold the SETUP key until the light blinks twice. 
3. Enter code 994, the light will blink twice.
4. Press the key to move once.
5. Press the key to overwrite once, the light will blink twice.

To move a particular key from one device mode to another:

1. Press and hold the SETUP until the light blinks twice. 
2. Enter code 994, the light will blink twice.
3. Press the relevant device key once.
4. Press the key to move once
5. Press the destination device key once.
6. Press the key to overwrite once, the light will blink twice.

Your One For All remote is capable of copying functions straight from the original remote control that came with your device.

1. To use the learning feature, please follow the instructions below:
2. Press the device key on the One For All to activate the mode that you wish to learn the functions onto (i.e. TV) 
3. Press and hold down the SETUP key until the LED underneath the device key blinks once then twice.
4. Press 9 7 5
5. Press and release the key you want to learn a function onto (for example the TV Power key) – The LED will blink continuously.
6. Press and release the corresponding key on the original remote, for example Power.
7. The LED will blink twice to indicate the key has been learned correctly.
8. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple remotes, but only one function per key.
9. When you learned all the functions you require, press and hold the SETUP key until the LED blinks twice.

Please note:

• If the LED shows one long blink at step 6, the function was not learned correctly, please try again from step 4.
• If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.

To use the Macro feature, please follow the instructions below:

1. Press and hold the SETUP key until the light blinks twice.
2. Enter the code 995.
3. Press the relevant key where the Macro will be stored.
4. Now select the device you want the first function of the Macro to come from, for example TV.
5. Enter the sequence of keys that you would like to be issued.
6. Press and hold the SETUP key to store the Macro. The light will blink twice to confirm.

In order to delete a macro, please follow the instructions below:

1. Hold the Setup key down until the light blinks twice.
2. Press 995, the light should blink twice.
3. Press the key you assigned the Macro to.
4. Hold the Setup key down to delete the Macro, the light will blink twice.