PDP Xbox REMATCH Advanced Wired Controller - Nubia Bronze

The tab located to the bottom middle of your right analog stick is referred to in your manual as the 'Audio Function Button', the purpose of this button is to control your game and chat audio when using a gaming headset plugged into the 3.5mm plug on the bottom of your controller. 

• To increase and decrease volume, hold the Function button while pressing the D-Pad UP or DOWN. 
• To adjust the game/chat audio balance, hold the Function button while pressing the D-Pad LEFT or RIGHT. 
• To mute and unmute your microphone, quickly press the Function button twice. The program status LED will turn RED when muted.

The PDP Xbox controllers can work on a Windows PC. If the controller does not work immediately upon connecting to a PC, then you may need to update the official Microsoft drivers in your PC through Windows Update. The controllers work via plug 'n' play with Windows 8.1 and Windows 10, with the latest updates installed. 

If the controller still does not work after making sure Windows is fully up-to-date, or if you are using an older version of Windows, you may need to install the drivers by visiting PDP here.

If you find that your controller's thumb sticks are showing movement without being touched, your controller may need to be recalibrated.  Please follow the provided instructions below to re-calibrate your controller. 

1. Unplug the USB-Cable from your Controller. 
2. Make sure your PC or Console is powered on and plug the USB-Cable into your PC or Console. 
3. Hold the DOWN button on your D-Pad 
4. Plug the smaller end of the USB-Cable into your controller. 
5. You now should see 2 LEDs light up (if you have an older controller, the controller will vibrate) one above the Home Button and one on the function button. The function Button is located at the right Analog Stick. 
6. You can now let go the DOWN button on your D-Pad. 
7. Press A on the controller. 
8. The LED lights will power off. 
9. Fully rotate both joysticks in a complete clockwise motion and pull each trigger fully (LT and RT). 
10. Press DOWN on the directional pad (D-Pad) again to finish the calibration.

In Fortnite, Go into Mouse and Keyboard Settings and turn off two input settings. 

Change Ignore Gamepad Input to OFF. Change Lock Input Method Mouse to OFF.