Remington Sapphire Luxe Hot Air Multi Styler AS5805

• After use, turn the appliance off by moving the temperature control switch to the O position.
• Unplug the appliance and allow to cool before cleaning and storing away.
• To maintain peak product performance and to prolong motor life, it is important to regularly remove any dust and dirt from the air filter grille and clean with a soft brush.
• To clean the area covered by the grille, twist it in the direction shown (Fig. C) and slide it down the cable. Clean the inside area then slide the grille back up the cable and twist it in the opposite direction until it locks.
• Don’t use harsh or abrasive cleaning agents or solvents.

1. Plug your styler in to the mains power supply. 

2. Turn your air styler on and select the appropriate setting for your hair by sliding the speed/heat selector switch. 

3. Your air styler has three settings: • High heat/speed O: Thick and difficult to style hair. • Low heat/speed N: Thin/fine, damaged or bleached hair. • Cool f: Helps to set your style with cool air.

Fit the attachment before you turn on the appliance. 

CAUTION: Attachments can become hot during use, let them cool before removing. 

1. To remove, twist the attachment until the markings line up as shown in figure A and pull it off the power handle. 

2. To fit an attachment, align the symbols on the power handle and attachment as shown in figure B then twist the attachment until it locks into place