Kenwood KMX750AB kMix Stand Mixer - Black

This would indicate the tool is at the wrong height and needs adjusting. To rectify, adjust the height using a suitable spanner.

This would indicate the Speed control not in the ‘O’ position. To rectify, check and turn speed control to the ‘O’ position.

This would indicate the Overload protection or overheat system activated or the maximum capacity exceeded. To rectify, try the following:

1. Unplug and check for obstruction or overloading. 
2. Turn the speed control to “O” and then restart. 
3. If the machine will not operate, remove some of the ingredients to reduce the load and restart.
4. If this still does not resolve the problem, unplug and allow to stand for 15 minutes. Plug in and reselect the speed.

This means the Stand mixer has been left plugged in for more than 30 minutes without being operated and has gone into Standby mode. To rectify, turn the speed control to ‘min’ then return to ‘O’ to reset the machine.