Vtech 5764 Smart Video 5 Inch HD Baby Monitor

• The parent unit’s LCD display will dim automatically after being inactive for some time. Press MENU/SELECT will turn the LCD display back on.

Try the following (in the order listed) for common cure:

• Disconnect the power to the baby unit.
• Wait a few minutes before connecting power back to the baby unit.
• Reboot the parent unit.

• The baby unit has a light sensor that measures the ambient light. When the ambient light is dim, such as during night-time or in a dark room, the baby unit activates its infrared LEDs, and the parent unit displays the live video in black and white.

• The baby unit may lose the Internet connection. Check your network and the router setting.
• Other electronic products may cause interference with your baby unit. Try installing your baby unit as far away from these electronic devices as possible.

• The parent unit speaker volume may be too low. Press VOL + to increase the volume.
• You may have set a low sound sensitivity level. Set the sound sensitivity to a higher level.

The parent unit’s LCD display will dim automatically after being inactive for sometime. Press MENU/SELECT will turn the LCD display back on.

The baby unit has a light sensor that measures the ambient light. When the ambient light is dim, such as during nighttime or in a dark room, the baby unit activates its infrared LEDs, and displays the camera view in black and white

You can reset the parent unit by pressing the RESET key at the back of the unit.
Use a pin and insert it into the hole on the back of the parent unit, and then press the button inside

1. Press and hold the Talk key.
2. When the microphone icon displays on screen, speak to your parent unit. Your voice is transmitted to the baby unit.
3. When finished talking, release the Talk key and hear your baby again.