Binatone U435 4.3 Inch Sat Nav Lifetime Maps Uk & ROI

The reset button can be found on the rear end of the unit. Insert the tip of the stylus pen or small blunt implement into the reset hole in order to press the button. The system will immediately reset.

The car mount has a suction pad that fits to the windscreen or a flat area on the dashboard.

Fitting to the windscreen:

• Pull the lever away from the suction pad. Place the pad on the widescreen and push the lever towards the pad until it clicks into place.

Fitting the holding bracket:

• It is best to fit this to the unit before it is attached to the windscreen. Slide the bracket onto the securing lug on the end of the ball mount at the end of the car mount and then push down firmly until it clicks into place. The bracket can only be fitted one way.

Fitting the unit:

• Slide the unit into the bottom of the bracket and carefully push the unit up and back until it clicks into place at the top. To remove the unit from the car mount; Press and lift the tab at the top of the bracket then pull the unit forward and out of the bottom of the bracket. 
• To remove the Car mount from the windscreen; Lift the lever away from the windscreen, then gentle pull the tab on the suction cup to release the suction as you pull the mount away from the windscreen.

128MB SDRAM Built-in. 

The charge indicator will display Red when charging and Green once fully charged.