Bush TDV7NBB 7KG Vented Tumble Dryer - Black

• Ensure the lint filter is clean by removing, cleaning, drying and refitting. 
• Clean the air intake shroud from any lint or debris, dry and then refit. 
• Check that the appliance is on a stable, level surface with sufficient clearance around it. 
• Ensure that the vents are not trapped or blocked which could create excessive noise. 

• Ensure the door is closed correctly with nothing obstructing it. 
• Ensure the lint filter is clean by removing, cleaning, drying and refitting. 
• Wipe the humidity sensors inside the drum to remove debris (if available on your model). 
• Clean the air intake shroud from any lint or debris, dry and then refit. 
• Perform a power reset by unplugging the appliance from power, holding down the Start/Pause button for 10 seconds, waiting 30 seconds and trying the appliance again.     
• Check that the load size is not too big or too small for the programme selected as it may overload or underload. 

If the cycle won’t start, try the following: 

• Ensure the door is closed correctly with nothing obstructing it. 
• Ensure a time delay has not been set. 
• Check that power is going to the appliance. 
• Ensure the lint filter is clean by removing, cleaning, drying and refitting. 
• Wipe the humidity sensors inside the drum to remove debris (if available on your model). 
• Clean the air intake shroud from any lint or debris, dry and then refit. 
• Perform a power reset by unplugging the appliance from power, holding down the Start/Pause button for 10 seconds, waiting 30 seconds and trying the appliance again.