Skip to main content
Fitbit Blaze Large Smartwatch - Blue

Product details

  • Brand: Fitbit
  • Catalogue number: 522/6171
  • Manufacturer's number: FB502SBUL

Fitbit support

UK: Eire:
0203 389 6416 1 691 7502
Mon-Fri: Sat-Sun:
Open 24 hours 9am to 5pm

Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

FAQs

Fitbit Blaze has detachable top and bottom wristbands that you can replace with accessory bands sold separately.To remove and replace a band:

  1. Place Blaze face down on a flat, smooth surface. You can tell it is face down when two buttons are on the left and one button is on the right.
  2. On either side (top or bottom), find the switch where the band meets the frame.
  3. Use your finger or nail to unlock the switch by gently sliding it to the opposite end. Pull the band away from the frame.
    User-added image
  4. Grasp the band you want to attach, making sure you choose the right one (top or bottom). The top band has a watch buckle at the end of it. The bottom band has notches.
  5. To attach the band, find the pin opposite the removal switch and slide it into the hole in the frame.
  6. Pull the switch while sliding the band into place, then release the switch to lock the band into the frame.
  7. Repeat on the other side.

To see these steps in action, watch the following video.


To get the basics on Fitbit Blaze, choose a section below.

WAKING A DIMMED SCREEN

The Blaze screen dims when not in use. To wake it up:

  • Turn your wrist towards you
  • Tap the screen
  • Press any button

USING THE CLOCK AND MENUS

The starting screen is a clock. On the clock you can:

  • Swipe up to see any notifications.
  • Swipe down to use shortcuts for controlling music or turning notifications on and off.
  • Swipe left and right to see specialized menus.
  • (Some clock faces) Tap to see your all-day stats.

User-added image

To browse different clock designs, see How do I change the clock face?

Tap to open a specialized menu:

USING THE BUTTONS

Blaze has three buttons: Action, Select, and Back.

User-added image

Use the Back button to return to the previous screen. The behavior of the Action and Select buttons depends on the screen, but usually these buttons are an alternative to tapping. For example, during an exercise you can tap the pause icon in the lower right or tap the Select button next to it instead.

User-added image

If your tracker has one of the following problems, it may be fixed by a restart:

  • Your tracker isn't syncing
  • Your tracker isn't responding to button presses, taps, or swipes
  • Your tracker is charged but doesn't turn on
  • Your tracker isn't tracking your steps or other stats

For restart instructions, choose your tracker below.

Note: Restarting your tracker turns it off and on without deleting any activity data. If your tracker saves notifications, a restart deletes them.

Follow these steps to restart your Fitbit Blaze: 

  1. Press and hold the Back and Select buttons (left and bottom right) until you see the Fitbit logo on the screen. This should take less than 10 seconds.
  2. Let go of the buttons.
  3. If your tracker doesn't work normally, use the instructions in How do I turn off my tracker? to turn Blaze off and back on again.

If you need additional help contact Customer Support.

Multisport mode on Fitbit Blaze lets you see real-time stats and a workout summary for the exercise you select, then saves the information in your exercise history. Certain exercises offer connected GPS tracking as described in Does my Fitbit tracker have GPS?

FIRST-TIME SETUP

If you plan to use connected GPS, verify the GPS-related settings on your phone:

  • FITBIT APP FOR IOS

  • First, make sure you can track your run, walk, or hike when you're out of Wi-Fi range:
    1. Open Settings and tap Cellular.
    2. Make sure Cellular Data is turned on.
  • Next, ensure that your GPS can continue tracking when your phone is locked:
    1. Open Settings and tap General.
    2. Tap Background App Refresh, find the Fitbit app, and make sure it is turned on.
  • Lastly, make sure your phone can identify your location:
    1. Open Settings and tap Privacy.
    2. Tap Location Services and make sure it’s turned on.
    3. Find Fitbit in the app list and make sure it's set to While Using the App or Always.


  • FITBIT APP FOR ANDROID

The verification steps for these platforms vary widely depending on the specific mobile device. If you're unsure how to verify anything mentioned, consult the instructions provided by your device manufacturer.

  1. Make sure your phone can track your activity when you're out of Wi-Fi range. This is usually achieved by making sure Cellular Data is turned on.
  2. Make sure GPS can continue tracking while your phone is locked.
  3. Make sure your phone can identify your location.This is usually achieved by enabling Location Services within your privacy settings.


To change the Exercise menu or make sure the exercise you want to track is included, see How do I customize the Exercise menu on my tracker?

If you want to receive time or distance-based updates (splits) on your Blaze during a run, turn on run cues in the Fitbit app. To find run cues, tap Account > Blaze > Exercise Shortcuts > Run (on Windows 10 mobile devices, tap Free Run). 

TRACKING AN EXERCISE

To use multisport mode:

  1. On your tracker, swipe to the Exercise screen and tap it, then swipe to find the exercise of your choice.

    If you see a gear icon in the lower left corner, that exercise offers connected GPS. Tap the gear to see an option for turning GPS on or off. Press the Back button (left) to return to your exercise.

  2. Tap the exercise to select. You’ll see the Let’s Go! screen.

    If you chose a connected-GPS exercise, you’ll see a phone icon in the top left. The dots mean your tracker is looking for the GPS signal. When the phone icon turns bright and the tracker vibrates, you know GPS is connected. Note that a weak GPS signal may cause your route and other activity data to be inaccurate.
    User-added image

  3. Tap the screen’s Play symbol or press the Select button (lower right) to begin tracking your exercise. A stopwatch appears showing your elapsed time. Tap or swipe up and down to scroll through your real-time stats or check the time of day.
    User-added image
  4. When you’re done with your workout or want to pause, tap the pause icon or the Select button (lower right).
  5. To see a summary of your results, tap the flag icon or press the Action button (upper right).
    User-added image
  6. Tap Done or press the Back (left) button to close the summary screen.

Syncing your tracker stores the workout in your exercise history. There you can find additional stats and see your route if you used connected GPS.

To see the multisport steps in action, watch our video:


The latest iOS release is affecting syncing on select Blaze trackers. On your mobile device go to Settings >About. If the Version is 10.1.1 or below, you're not affected by this issue and it's likely your syncing difficulty is caused by a missing requirement or other common issue. Follow the instructions in Why won't my tracker sync?
If the Version is 10.2 or 10.2.1, update your Blaze to the latest firmware version (8.301.8) to resolve the issue. For step-by-step instructions, see How do I update my tracker? 
If you're receiving an error when attempting to update your Blaze's firmware, follow these steps:
  1. On your mobile device, go to Settings > Bluetooth. Find Blaze in the My Devices list.
  2. Tap the info icon and tap Forget this Device.
  3. Go back to the Fitbit app and update your tracker.
After the update is complete, you'll need to turn on notifications again. To do so, follow these steps:
  1. From the Fitbit app dashboard, tap the Account tab.
  2. Tap Blaze.
  3. Tap Notifications. Turn on the specific notifications you'd like to see and follow the prompts.

If you can't update your tracker, try the instructions below.

UPDATE FAILURES

If the connection between your tracker and mobile device is interrupted during the update, you may see this image:
User-added image

Try these steps to resolve the problem:

  1. Turn your tracker off and on again using the instructions in How do I restart my tracker?
  2. Reboot your mobile device.
  3. Try the firmware update again. If it doesn't work, on a different mobile device or computer (if available) log into your Fitbit account and try updating your firmware.
     

    Note that if you get notifications from your mobile device on your tracker, before you can use a different device or computer you need to follow the instructions in Why won't my tracker sync to another device or computer?

  4. For assistance, please contact Customer Support.

If the update fails and you see this image, you'll be unable to use the tracker until the error condition is resolved:
User-added image

In this case tap a screen or press a button to return to the clock and try the update again. (If you see "fitbit.com/setup"; follow the instructions in How do I set up my tracker?) If the update doesn't work, restart your tracker and try again.

LOW BATTERY OR LOW/HIGH TEMPERATURE

If you see the critically low battery screen when attempting a firmware update, charge your Blaze and try the update again.

Likewise if you see a temperature screen, try the firmware update again when Blaze has cooled off or warmed up.

User-added imageUser-added image
Blaze is too warmBlaze is too cold

If you receive call, text, or calendar notifications on your Fitbit tracker, your tracker has a Bluetooth "bond" with the mobile device that sends the notifications. This bond prevents the tracker from syncing with another mobile device or a computer.


To quickly and temporarily disable the bond, turn off Bluetooth on your mobile device. You can turn it back on later to resume syncing.


If you no longer use notifications, remove the bond:

  1. Go to Settings > Bluetooth on your mobile device to to see a list of associated Bluetooth devices. This list might contain only your Fitbit tracker or also include devices like wireless speakers, headsets, etc.
  2. Tap your tracker and choose "Forget This Device" or "Disconnect" (exact language will differ depending on your operating system).

You can now set up your tracker using another mobile device or computer. For instructions see How do I set up my tracker?

If your battery isn't charging, test the solutions below. If your battery is draining too quickly after a charge, see Can I improve my tracker's battery life?
 

ProblemSolution
The contacts on the tracker or charging cable are dirty.Dust and debris can accumulate over time and prevent a charge. Clean the charging contacts using the instructions in How do I clean my tracker?
The USB port or outlet is faulty.If you haven't done so, try a different port. A UL-certified wall charger will also work. Don't use a USB hub.
The tracker isn’t connected securely to the charging cable.Check the alignment and try reconnecting your tracker to the charging cable. For illustrations and tips on how to know if the connection is secure, see How do I charge my tracker?
The tracker is malfunctioning.When in doubt, it doesn't hurt to turn your tracker off and back on. For instructions see  How do I restart my tracker?


If you've tried all four solutions but your tracker won't charge, contact Customer Support.

To explore the compatibility of your device, please click here.  On this page, you will be able to select your device type & view all of the available features within the Fitbit app.

Questions & answers

How-to videos

  • How To Charge Your Tracker

  • How To Switch Accessory Bands

  • How To Customize the Clock Face

  • How To Check All-Day Activity Stats

  • How To Track Workouts with Multi-Sport Modes

  • How To Track Heart Rate

  • How To Set Up A Tracker On A Mobile Device

  • How To Sync and Get Notifications with iOS Devices

  • How To Sync and Get Notifications with Android Devices

  • How To Set Up A Tracker On A Computer

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.