Skip to main content
Bush Classic BRTL60170 Retro Fridge - Black

Product details

  • Brand: Bush
  • Catalogue number: 355/0148
  • Manufacturer's number: BRTL60170

Argos Service Line

UK: Eire:
0345 257 7271 +44 345 257 7271
Mon-Sat: Sun:
9am to 6pm 10am to 4pm

Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

FAQs

Please ensure that the drain hole is clear and free from obstructions such as food or packaging. If this does not resolve the issue, please contact the product helpline found on the right hand side of this page.

You can register for your free Bush guarantee in a few simple steps by clicking here or watch the video below which will walk you through all the methods to register along with the benefits of doing so.


If there is ice build-up in the fridge section, try the following:

  • Ensure there is the correct clearance around the appliance. This will be stated in your user manual.
  • Ensure it is located in an area of a similar temperature between 10-32 degrees.
  • Check that the door is closing properly and there is no debris in the seals.
  • Avoid over-filling the appliance and ensure nothing is touching the back.
  • Check that the fridge is on a setting between 3 and 4.
  • Keep the appliance away from any heat sources.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Ice build-up in the fridge
  • Any affected areas you can see

If the freezer section is freezing too much, try the following:

  • Ensure there is the correct clearance around the appliance. This will be stated in your user manual.
  • Keep the appliance away from any heat sources.
  • Check that the door is closing properly and there is no debris in the seals.
  • Avoid over-filling the appliance and ensure nothing is touching the back.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • Ice build-up/area freezing up
  • Any affected areas you can see

If both areas are not cooling, try the following:

  • Ensure there is the correct clearance around the appliance. This will be stated in your user manual.
  • Ensure it is located in an area of a similar temperature between 10-32 degrees.
  • Check that the door is closing properly and there is no debris in the seals.
  • Avoid over-filling the appliance and ensure nothing is touching the back.
  • Check that the fridge is on a setting between 3 and 4.
  • Keep the appliance away from any heat sources.
  • Check the power is coming on correctly and, if necessary, try an alternative mains socket and fuse.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker

If there is a smell coming from the appliance, try the following:

  • Check the door seals and ensure they are clean.
  • Empty and wipe out the drip tray at the back of the appliance above the compressor tank.
  • Turn the appliance off, clean the inside with warm water and white vinegar. If necessary, leave a lemon inside the appliance for a few hours to help remove any smells.
  • Check food has not leaked anywhere and keep on top of food maintenance.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker

If the drainage hole is blocked, try the following:

  • Use the brush included with the appliance to clean the drain hole.
  • Pour water down the hole and check the drip tray to ensure the water is dripping through.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker

If the appliance isn’t level, try the following:

  • Ensure the adjustable feet are set and tight. They can be screwed and unscrewed. You can find more instructions on this in the user manual.
  • Ensure the flooring is level.
  • The front of the appliance will be elevated slightly more than the back, allowing any water to run down the drain hole.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker

If the water dispenser is leaking, try the following:

  • Remove the water dispenser.
  • Check the seals that the water dispenser is going into for any gaps or debris.
  • Put the dispenser back in.
  • Check that the lever itself is not loose or stuck.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Water dispenser
  • Serial number sticker

If water is not being released from the water dispenser, try the following:

  • Remove the water dispenser.
  • Check the seals that the water dispenser is going into for any gaps or debris.
  • Put the dispenser back in.
  • Check that the lever itself is not loose or stuck.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Water dispenser
  • Serial number sticker

If the light is not working, please refer to your user manual for instructions on changing the bulb. If the issue is still not resolved or your manual does not state the bulb can be removed, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker
  • The light not working


If the compressor is not making a touch, try the following:

  • Ensure there is power going to the appliance.
  • Check there is enough clearance around the appliance.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs of the following:

  • Front of the appliance
  • Serial number sticker

The compressor sound should be a humming noise from the compressor every now and then. This is when the appliance needs to get to the correct temperature and is expected. If you still believe it is too loud, check the following:

  • Ensure there is clearance around the appliance.
  • Check both sections are cooling correctly.

If the issue is still not resolved, get in touch with the support team by using the contact details on the right hand side of this page. To best assist you with your query, we may require photographs and videos of the following:

  • Front of the appliance
  • Serial number sticker
  • Video of the sound coming from the compressor

Questions & answers

How-to videos

  • How to register your product

  • How to use

  • Tips and Tricks

  • Important Information

  • How to Check Door Seals

  • Understanding and Maintaining a Frost Free Fridge

  • Performing Maintenance on a Fridge Water Dispenser

Returns policy

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page.

If you still need to return your product then please visit our most up to date returns policy here.